Ctek Automation Control Application APN007 Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
Application Note – Automation Control Application
APN007 25 July, 2014
30
Figure 30 - Edit Input Formula
Operands
Current Input Pin:
Selects the input value provided by the pin to which the formula is attached as an operand
Other Input Pin:
Selects the value on the input pin referenced in the right hand column
Output Pin =
Selects the value on the output pin referenced in the right hand column
Constant Value =
Use the constant entered in the center column as the next operand
Correction:
The correction value associated with this input becomes the next operand
Min Range:
The minimum range value associated with this input becomes the next operand
Max Range:
The maximum range value associated with this input becomes the next operand
Max – Min Range
The value (Maximum Range - Minimum Range) becomes the next operand
Min Units:
The minimum units value associated with this input becomes the next operand
Max Units:
The maximum units value associated with this input becomes the next operand
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 50 51

Comentarios a estos manuales

Sin comentarios