Ctek Automation Control Application APN007 Manual de usuario descargar pdf (Pagina 8)

Application Note – Automation Control Application

APN007 25 July, 2014

4. Configure outputs on each installed module

5. Create and assign formulas as required

6. Create and assign programs as required

Once configuration has been completed the selections are deployed using the Execute New

Configuration button. If logging is used the Logs selection can provide useful information about

system operation and can also be used to debug sensor and output installations.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Sin comentarios

Ctek Automation Control Application APN007 Manual de usuario Pagina 8